When Is The Best Time To Test For Radon?

Radon gas is colorless, odorless, and invisible, and you are constantly surrounded by it, especially in your home. The gas is produced naturally from a breakdown of uranium in soil, rock, and water. When the levels of radon gas get too high and infiltrate your home, it can be deadly. Unlike carbon monoxide, there is not a device that you can leave in your home to alert you when conditions become dangerous. While there are monitors homeowners can get, they are often inaccurate and cannot monitor both radon gas and carbon monoxide.

The dangers of radon gas are not well known and are rarely discussed. This poses a large threat as symptoms of radon gas exposure take a long time to detect, so you may not be a way that someone in your home is experiencing symptoms. Long-term exposure can lead to cancer and even death. In fact, radon gas is the leading cause of lung cancer among nonsmokers. The only way to truly protect your home and family is with regular radon gas testing. But how do you know when is the best time of year to have your home tested?

Ideal Conditions for Testing Your Home for Radon

The best time to test is during the fall or winter months since your home is closed up and windows are not kept open. As a result, radon levels will be the highest during these cold months. You can test any time of year so long as windows and doors remain shut for the duration of the test in order to recreate fall and winter conditions. Testing should never be done during snow, rain, or wind storms as this can cause the readings to fluctuate from 2.0 to 6.0 pci/l points. This occurs as a result of negative pressure on the ground which forces more radon to travel up through the cracks and foundation into the home.

Types of Radon Tests

While there are a variety of radon gas testing procedures, they are not equally effective. Most homes will not be able to obtain an accurate result from just one properly executed screening measurement. Homes that are already equipped with a radon mitigation system would only require testing every few years; however, radon gas measurements should be ongoing since radon levels can change constantly. 

Continuous Monitor

A specially trained and certified home inspector will set up a computerized test for at least 48 hours.  Once the test has concluded, a printout is generated which shows the hour-by-hour readings and determines the overall average level. These monitors are especially good at determining if the testing conditions are not ideal. For instance, the test will show a drastic drop if a window is opened during the test. If the average goes above 4.0 pci/l, the Environmental Protection Agency (EPA) recommends that a mitigation system be installed. While detailed, a continuous monitor can be expensive with most inspectors charging anywhere from $150-$300. Furthermore, costs could go up as inspectors have to pay to own and maintain the monitor. 

Homeowner Radon Monitor

Homeowners can purchase computerized tests to use in their homes to detect radon levels; however, the results may appear misleading as wind, snow, and rain can increase the levels. The monitor may spike up to 9.0 pci/l simply because the wind picked up that hour, not because the levels of radon gas increased. While these monitors will provide an average over a seven-day period, they are only about 50% accurate, expensive, and can be tampered with easily.

Charcoal Radon Test Kits

These tests can be purchased at hardware stores, online, or directly from testing labs. They do not require power and are often used the test the accuracy of radon monitors. They can be used during any season so long as all external doors, windows, and vents remain closed for the entire duration of the test. Depending on the test, it should be left in place for 2-8 days and in the lowest livable space. Crawl spaces are not a suitable location for a test as your family does not live there. However, unfinished basements are suitable as this is an area that is potentially habitable. Once the test is concluded, it must arrive at a lab within 10 days so the radon does not decay and affect the reading. Priority mail will ensure that your test arrives at a lab within 2-3 business days.

Turn To The Professionals

PineBreeze has found from first-hand experience that radon levels are high all along with the front range.  In Colorado Springs, for instance, radon testing has shown over 50% of homes have high levels of radon and require radon mitigation. Similar results are found south of Colorado Springs as well in Pueblo, Co, Pueblo West, Co., as well as most of the front range and up into Cripple Creek, Divide, and Woodland Park, Co.